1. Are you a current member with account or password issues?

    Please visit following page for more information

    Dismiss Notice

Show us your Sharps, the Fourth Dimension!

Discussion in 'Knives' started by cowsmilk, Mar 3, 2014.

Thread Status:
Not open for further replies.
  1. kdurt

    kdurt Loaded Pockets

    Joined:
    Jan 12, 2014
    Messages:
    852
    Likes Received:
    5,071
    Looks like you can move it back and forward a bit if you want but i haven't tried. For me works good right where its at. Knife has that super light weight but still super solid feel like a Spyderco endura or delica. No blade play and tight lock up. I really like this knife but its more a sum of a lot of little things in synergy versus one thing that stands out. Sandvick steel gets slicy sharp highly recommend it.
     
  2. flatblackcapo

    flatblackcapo EDC Junkie!!!!!

    Joined:
    Sep 30, 2013
    Messages:
    2,902
    Likes Received:
    50,551
    Thanks kdurt. The light weight part just makes me want one more. I totally agree with you on the Sandvick steel.
    annnnnd while I am here I might as well post a pic of a knife. :D
    [​IMG]
     
  3. blacmud8

    blacmud8 Loaded Pockets

    Joined:
    May 18, 2011
    Messages:
    923
    Likes Received:
    1,673
  4. Antithetik
    • In Omnia Paratus

    Antithetik EDC Junkie!!!!!

    Joined:
    Apr 2, 2013
    Messages:
    9,206
    Likes Received:
    218,206
  5. Merc

    Merc Loaded Pockets

    Joined:
    May 29, 2013
    Messages:
    409
    Likes Received:
    7,674
    My small Delica family :)
    [​IMG]
     
    WichitaJLJ, Melders, microbe and 11 others like this.
  6. Slayer2003
    • GITD Manix 2XL Owner

    Slayer2003 Loaded Pockets

    Joined:
    Apr 18, 2014
    Messages:
    329
    Likes Received:
    1,742
    More goodies today. :) I really need to splurge on lighting for my office for once rather than more knives hehehe.

    SAK Alox Farmer in orange - Finally found an orange Alox!
    CRKT Tighe Rod - epic flipper, no one mentioned the uncaged BBs however! Near catastrophe upon "inspection"! x.x

    [​IMG]
    [​IMG]
     
    microbe, scbubba, KODIAKman and 11 others like this.
  7. flatblackcapo

    flatblackcapo EDC Junkie!!!!!

    Joined:
    Sep 30, 2013
    Messages:
    2,902
    Likes Received:
    50,551
    OK, I did a little testing today and my conclusion is that all the blades are good to go. They had a real toothy edge on them from the factory so I did a quick strop. After the stropping ( about 2 min. per blade.) all the blades were able to cut phone book paper with ease. I ran through all the blades doing a little whittling , cut up a bit of plastic clam shell packaging and a little bit of nylon 1/2" rope. I tried to do a equal amount of cuts with each blade. After the cutting I went back to see how the blades did on the phone book paper. They all still cut the phone book paper but with some slight snags here and there. The edge wear seemed about equal with all three blades. Another quick stropping and all the blades were back to slicing cleanly again. The 440 steel ( which 440 steel, I am not sure.)actually held up a little better than I expected it to. I hope that helps.
    [​IMG]
     
  8. PBJS II

    PBJS II Loaded Pockets

    Joined:
    Jul 9, 2009
    Messages:
    7,443
    Likes Received:
    18,273
    Sounds like you got a good one! I have a Barlow and a Whittler that are A-Ok.
     
  9. bayvillageidiot

    bayvillageidiot Loaded Pockets

    Joined:
    Feb 24, 2013
    Messages:
    444
    Likes Received:
    4,612
  10. bleh

    bleh Loaded Pockets

    Joined:
    May 9, 2012
    Messages:
    1,622
    Likes Received:
    6,786
  11. Antithetik
    • In Omnia Paratus

    Antithetik EDC Junkie!!!!!

    Joined:
    Apr 2, 2013
    Messages:
    9,206
    Likes Received:
    218,206
  12. Joost Heijnen
    • GITD Manix 2XL Owner
    • In Omnia Paratus

    Joost Heijnen EDC Junkie!!!!!

    Joined:
    Nov 24, 2012
    Messages:
    3,972
    Likes Received:
    87,817
  13. Joost Heijnen
    • GITD Manix 2XL Owner
    • In Omnia Paratus

    Joost Heijnen EDC Junkie!!!!!

    Joined:
    Nov 24, 2012
    Messages:
    3,972
    Likes Received:
    87,817
    WichitaJLJ, Melders, microbe and 17 others like this.
  14. Here Comes The BOOM

    Here Comes The BOOM EDC Junkie!!!!!

    Joined:
    Dec 31, 2012
    Messages:
    2,658
    Likes Received:
    17,425

    I really like your taste in knives man, who made this one?
     
    320priebnow and Brtsmpsn like this.
  15. Stammoss
    • In Omnia Paratus

    Stammoss EDC Junkie!!!

    Joined:
    Jan 5, 2014
    Messages:
    1,032
    Likes Received:
    33,124
  16. SMAJ
    • GITD Manix 2XL Owner
    • In Omnia Paratus

    SMAJ Loaded Pockets

    Joined:
    Apr 21, 2014
    Messages:
    2,528
    Likes Received:
    23,279
    love, love, love these knives!! This is pretty much the only knife I want for my keychain.
     
    microbe, scbubba, 320priebnow and 2 others like this.
  17. Joost Heijnen
    • GITD Manix 2XL Owner
    • In Omnia Paratus

    Joost Heijnen EDC Junkie!!!!!

    Joined:
    Nov 24, 2012
    Messages:
    3,972
    Likes Received:
    87,817

    And I've got anther special one inbound..
     
    microbe, scbubba, 320priebnow and 3 others like this.
  18. Whiteswoodworks

    Whiteswoodworks Loaded Pockets

    Joined:
    Jun 18, 2013
    Messages:
    256
    Likes Received:
    244
    When I got this a couple of weeks ago, I couldn't imagine how it could get any better than this for edc. Now after BM sent me this clip, my other knives are dead to me. [​IMG]

    -Stay classy
     
  19. Dale

    Dale Loaded Pockets

    Joined:
    Sep 2, 2012
    Messages:
    923
    Likes Received:
    2,089
  20. Lightnig

    Lightnig Loaded Pockets

    Joined:
    Dec 25, 2011
    Messages:
    2,962
    Likes Received:
    10,090

    Niiiice!
     
    320priebnow and Brtsmpsn like this.
Thread Status:
Not open for further replies.