1. Are you a current member with password issues? Click Here

Zipper Pull Poll

Discussion in 'EDC Bags' started by chrischoi, Nov 2, 2012.

    CheepSteal Loaded Pockets

    I used 7 mm heat shrink tubing that I found at a local boating/marine store (it shrinks to 3.5 mm; half it's start diameter) and I cut some 550 cord that was longer than I needed because it makes it harder to tie with the heat shrink tube in place. I cut off the ends and melted it to make sure it stays put, then used a heat gun to shrink the tubing, I made sure to thoroughly wet the bag around that area and especially on the zipper so it wouldn't melt the bag/zipper.

    The Goruck packs use hollowed out cord I believe, so if you went that way, you'd probably need 5 mm heat shrink instead of the 7 mm.
    amdmaxx, TARFU and bigfoot like this.
    • +4 Supporter
    • +3 Supporter
    • +2 Supporter
    • +1 Supporter
    • In Omnia Paratus

    tower Uber Prepared

    You need to color code according to contents. That way whichever pack you use, you'll know where you have your side arm, FAK, food, tools, etc.
    Last edited by tower, Nov 4, 2012
    Gnarly and amdmaxx like this.
    • +3 Supporter
    • In Omnia Paratus

    zebedee Loaded Pockets

    On my Rush 12 I used burgundy reflective 550 on the outside and yellow digicam 550 on the inside.

    chas9rr Loaded Pockets

    Redleg22 Loaded Pockets

    sleestac Loaded Pockets

    +1 on color coding.

    70dart Loaded Pockets

    I'm thinking of gray to match the gray stitching in my black kodiak:)

    Ciclope Loaded Pockets

    Grey outside = low visibility
    Red inside = more visibility
    amdmaxx likes this.

    wave180 Loaded Pockets

    How about all grey, then red on the busiest zipper/pouch?
  1. tough between the red and grey, I think both would look good.
    I am zero help to you, sorry :(

    ShadowE Uber Prepared

    I saw your initial post/pic and thought you had already removed them :)

    chrischoi Loaded Pockets

    I wish. They were just missing. I emailed in and they are sending them out.

    Sent from my SPH-L710 using Tapatalk 2

    Gray_Pierce Loaded Pockets

    Per my experience with black bags, Neon Green zipper pulls are the best. It' visible in lowlight conditions and mitigates the " tactical " look of the bag, sort of... LOL
    [IMG]

    lefty81 Loaded Pockets

    I don't think you can go wrong with either colour, however, since you asked for a poll, my vote goes for red, red on black looks sharp.

    lefty81 Loaded Pockets

    on a separate note, where is a good place to buy paracord from? have to accept paypal and ship to Canada.
    • +1 Supporter
    • In Omnia Paratus

    fresh eddie fresh Loaded Pockets

    Supply Captain has a great selection. I know they take PayPal, you would have to e-mail them to see about Canadian shipping.

    http://www.supplycaptain.com/

    I put neon pink on my black GG Stealth pack, but I am liking the look of the neon green! (I was trying to get rid of the Mall Ninja look.)

    chrischoi Loaded Pockets

    I went with Amazon. Good stuff.

    Sent from my SPH-L710 using Tapatalk 2

    themadplumbarian Uber Prepared

    On a black bag, hmm. I'd go with all gray and the very important compartment red, or used the same paracord i used, black with a reflective string, but the tips, I'd go with the ones I put on mine, glow in the dark, and one whistle tip, if you look closely it's the third in from the left, JR
    [IMG]

    amdmaxx Loaded Pockets

    grey on the outside.. and perhaps some thoughtful color-coding..
    • In Omnia Paratus

    Lannister Loaded Pockets

    Supply Captain does ship to Canada. I've used them a few times.


    Sent from my iPad using Tapatalk