Etowah Edge & Tool stuff available FS [Archive]

Etowah Edge

03-30-2009, 10:36 AM

These are Ebots (edged bottle opener tool). They come with the sheaths shown with a belt clip installed.

The one on top is 3" OAL
The one with no bottle opener (I still call it an Ebot) is 3.5" OAL.
$90.00ea + $5.00 shipping SOLDOUT

http://i470.photobucket.com/albums/rr69/EtowahEdge/GroupofEbots.jpg

Etowah Edge

03-30-2009, 02:23 PM

I have had a lot of requests for other tools so this is from a while back. Keychain card knife with pry corner. This is the last one of these I have in stock for now. It is A2 tool steel heat treated and black oxide coated. Comes with a black kydex sheath.
$45.00 +$5.00 shipping SOLD

Thanks for looking
James

http://i470.photobucket.com/albums/rr69/EtowahEdge/smcard1.jpg

phillychenz

03-30-2009, 02:32 PM

i'll take it card knife

phillychenz

03-30-2009, 03:00 PM

pp sent................Good Luck on the rest!!

MattR

03-30-2009, 03:57 PM

Great stuff I tell ya. I've got a small pry blade on the way from James and he's been nothing but accommodating. How great is RG and Coyote brown Kydex?!! O0

phillychenz

04-02-2009, 07:34 PM

Card knife arrived today. Great work, will purchase again!!!! O0

Mike

04-02-2009, 08:04 PM

Got my new tool today. Very nice work! O0

Thank you.

Etowah Edge

04-06-2009, 04:43 PM

Here is a spy model in coyote cord and kydex. Chisel grind with coated finish. Belt clip.
$90.00+$5.00 shippnig SOLD

http://i470.photobucket.com/albums/rr69/EtowahEdge/spy1.jpg
http://i470.photobucket.com/albums/rr69/EtowahEdge/spy3.jpg

Etowah Edge

04-06-2009, 07:05 PM

"Carry Size Pry Knife" in D2 tool steel with oxide coating. Coyote cord and sheath. 3" OAL.
$55.00+$5.00 shipping SOLD

http://i470.photobucket.com/albums/rr69/EtowahEdge/PryKnife.jpg

phillychenz

04-06-2009, 08:14 PM

"I'LL TAKE IT".............Pry knife.

Etowah Edge

04-06-2009, 08:38 PM

PP request sent. Thanks

James

Etowah Edge

04-07-2009, 05:59 PM

phillychenz, Got your item shipped today.
Thanks
James

heathah

04-07-2009, 08:12 PM

I received my two pry knives just the other day.

Awesome work! O0

Heath

Etowah Edge

04-09-2009, 08:09 AM

Ebots (edged bottle opener tool). They come with the sheaths shown with a belt clip installed.
$90.00ea +$5.00 shipping SOLDOUT

http://i470.photobucket.com/albums/rr69/EtowahEdge/GroupofEbots.jpg

ntp3

04-09-2009, 08:41 PM

Any more Pry Knives available?
:)

Etowah Edge

04-09-2009, 10:00 PM

The ones that have been shown here are sold out. I have a couple that have rounded pommels, but don't have the sheaths ready.

Etowah Edge

04-14-2009, 09:48 PM

Here is a "Carry Size Pry Knife" with out the pry end on the handle.
$55.00+$5.00 shipping SOLD

http://i470.photobucket.com/albums/rr69/EtowahEdge/NPPry.jpg

Gryphon

04-20-2009, 10:05 PM

Love these pieces. I think I have one of everything. Let me know when the next batch comes out...I want to upgrade some of my older pieces to D2.

Great job. - RG

Etowah Edge

04-21-2009, 01:02 AM

Thanks Robert, I will keep you posted. I'll have more full size knives coming soon and some new key chain\pocket tool designs too.

James

Cosmo7809

04-21-2009, 10:08 AM

and some new key chain\pocket tool designs too.

:roof: :roof: :roof: :roof:

Etowah Edge

05-19-2009, 07:10 PM

Here is some handmade "Carry Size Pryz" pry bar. The hardness is 59 Rc. The coating is black oxide. They have the rustic logo etched in the finish. They are approximately 4" long. They are not sharpened but can be then used as a chisel.
$30.00ea + $5.00 shipping.

Thanks

James EE&T

tan 550 cord
OD green 550
camo cord
red & green cord
small OD Green
small jute cord
no cord
http://i470.photobucket.com/albums/rr69/EtowahEdge/prybars.jpg

Etowah Edge

07-20-2009, 10:05 PM

My web site is up but still a work in progress. See me at etowahedgeandtool.com .

Thanks
James

moeman

07-21-2009, 05:40 AM

Here is a "Carry Size Pry Knife" with out the pry end on the handle.

http://i470.photobucket.com/albums/rr69/EtowahEdge/NPPry.jpg

Hi, I am interested in one of these, do you have any available now?
thanks,
chris

Etowah Edge

07-21-2009, 06:34 AM

I have a sale pending on the last one in stock. I'll let you know if it is still available. Thanks for checking out my stuff!

James

moeman

07-21-2009, 12:00 PM

thank you

balldboy

07-21-2009, 06:17 PM

Tagged for more Win!!!
Pete

Etowah Edge

07-21-2009, 08:20 PM

thank you

PM sent
Thanks
James

chadillac58

07-21-2009, 08:40 PM

Any Ebots left?

Etowah Edge

07-21-2009, 08:49 PM

I have a couple that do not have sheathes ready. I hope to have a couple posted on etowahedgeandtool.com by Saturday evening.
Thanks
James

balldboy

07-21-2009, 11:20 PM

Q: what is the price of an Ebot without the opener feature???
TIA,
Pete

Etowah Edge

07-22-2009, 07:45 PM

Q: what is the price of an Ebot without the opener feature???
TIA,
Pete

It's the same price either way $90.00 with the belt clip sheath.
Thanks
James

chadillac58

07-23-2009, 08:16 PM

Thanks I will be sure to check on Saturday.

Etowah Edge

07-25-2009, 08:16 PM

I got some knives put up on etowahedgeandtool.com today but did not get the Ebot sheaths ready in time. I'll try to get some on there this week. Here is one of the new Cruiser models. D2 with sand blast finish and black linen micarta scales with red liners. The blade is 4.25" long and .25" thick. It is flat ground from the edge to the spine and cuts very well. These start at $165.00 + $5.00shipping.

UP DATE on 2-10-10: I am trying to keep these in stock to keep up with orders. Available in 5/32", 3/16", and 1/4" thickness and several types of steel

http://i470.photobucket.com/albums/rr69/EtowahEdge/CruiserBk1-600.jpg
Thanks
James.

arewethereyetdad

07-25-2009, 11:11 PM

Wow, this looks like great stuff. I need to get in on any future runs. Beautiful work, Etowah Edge. O0

Etowah Edge

08-09-2009, 10:08 PM

Cheap Trick is a slim EDC back up. The sheath has no belt clip or rigid loop to make it as slim as possible and the paracord on the sheath makes a belt loop, attachment point and leg tie. It is made of D2 tool steel and has a bead blast finish. The V ground drop point blade is 3.25" with 3.75" handle and it is .5" wide. $90.00 + $5.00 shipping Sold
Thanks
James EE&T

http://i470.photobucket.com/albums/rr69/EtowahEdge/CheapTrick1-600.jpg

Etowah Edge

08-18-2009, 07:15 PM

The Pry Knives are back in stock. The sheaths are available in OD Green, Coyote and Black. Right or left hand grind. Several cord colors available. These are D2 tool steel with blkox coating. 3" OAL. $55.00 ea. + $5.00 shipping.

http://i470.photobucket.com/albums/rr69/EtowahEdge/PryKnivescolors-600.jpg

The Goose Wing. This is a one of a kind based on an old goose wing hewing axe I own( shown in the pic ). It is made of D2 tool steel, blkox finish, comes with a kydex sheath, pry tip and is very sharp. About 3.5" OAL. $75.00 + $5.00 shipping.(SOLD)

http://i470.photobucket.com/albums/rr69/EtowahEdge/Goosewing-600.jpg

http://i470.photobucket.com/albums/rr69/EtowahEdge/Goosewing2-600.jpg

Thanks
James EE&T

kii

08-20-2009, 06:41 PM

Is the Goose Wing still available

Etowah Edge

08-20-2009, 09:20 PM

It is.

Thanks
James

kii

08-20-2009, 09:26 PM

1 pry knife with coyote and a brown desert camo,right hand grind
1 Goose Wing

Thanks

Keith

kii

08-20-2009, 10:12 PM

PP sent

Etowah Edge

08-21-2009, 06:23 AM

Thank You. I'll get them on the way.

James EE&T

scout24

08-21-2009, 08:40 PM

Paypal sent after E-mail for availability for 1 pryknife, black sheath and black cord. These look very solid, can't wait to check out your work!!

Etowah Edge

08-21-2009, 09:50 PM

Paypal sent after E-mail for availability for 1 pryknife, black sheath and black cord. These look very solid, can't wait to check out your work!!

It's ready!
Thanks, it will be shipped out tomorrow.

James

kii

08-24-2009, 11:36 AM

Got them today and they are great!

Etowah Edge

09-23-2009, 08:42 AM

I have more of these in stock as described below.

http://i470.photobucket.com/albums/rr69/EtowahEdge/PryKnivescolors-600.jpg

Etowah Edge

01-14-2010, 10:53 PM

I will be running a new batch of Ebot tools next month. If anyone wants one , PM me by Jan. 20th to be added to the list. These will all have neck/carry sheaths and will be $85.00+$5.00 shipping. Pry knives are low now so i will probably run some more of those too.

Thanks
James

Gryphon

01-14-2010, 11:45 PM

I'd be all over these if I didn't already have a variety of them. There's a certain aspect of solidity to these tools that tends to be lacking in some of the fanicier varieties...not to say that these are too plain, and not to put down fancy collectible tools (I certainly collect them). Still, these do feel exceptionally solid. And I do like the hard black treatment over hard tool steel.

Etowah, have you considered adding knurled surfaces, or some other kind of surface effect to further improve the leverage one can get, especially on some of the smaller tools? Also, this might be overkill and add to much expense, but it might be interesting to add a pocket clip to a couple of examples of the non-edged tools. Atwood even did this once an awhile (I have at least one piece of his like that). If not a clip, perhaps a hole designed to enable keychain carry, or even to be hung from one of Munroe Design's "Danglers."

Just some new thoughts from your one of first customers on EDCF (I think?) RG

soli

01-15-2010, 05:12 AM

Etowah Edge

01-15-2010, 06:12 AM

hey guys, I still cut every thing out by hand as I go so if you want one with no bottle opener or 3.5" or 3" models all that can be done upon request. The knurling and textures could be an option later on. I will work on some options and let you know what happens.

Thanks
James

Etowah Edge

01-21-2010, 07:39 PM

Thanks for the orders guys. Now I have to get busy! LOL :bolt:

James

Crco

01-24-2010, 07:32 PM

James, I recently bought from you an EBot ... and I recently got one of your Small Pry Knives from Fenix Outfitters. Both are fantastic! So I just noticed this thread and I'm very interested in one of your Carry Size Pryz (from below). Do you have any available? If I had a choice of the cord options, I would like the 550 OD Green. Thanks for your time.

Here is some handmade "Carry Size Pryz" pry bar. The hardness is 59 Rc. The coating is black oxide. They have the rustic logo etched in the finish. They are approximately 4" long. They are not sharpened but can be then used as a chisel.
$30.00ea + $5.00 shipping.

Thanks

James EE&T

tan 550 cord
OD green 550
camo cord
red & green cord
small OD Green
small jute cord
no cord
http://i470.photobucket.com/albums/rr69/EtowahEdge/prybars.jpg

Etowah Edge

01-25-2010, 05:13 PM

DemskeetSkeet

02-16-2010, 08:53 PM

Excellent work and reasonable prices.

I may have to purchase something from you soon.

Keep up the great work!

Oh, any folders in the works?

Etowah Edge

02-18-2010, 03:45 PM

Oh, any folders in the works?

Thanks for the comments. I have a folder designed. I hope to have a proto built soon.

Thanks
James

DemskeetSkeet

02-18-2010, 08:00 PM

Thanks for the comments. I have a folder designed. I hope to have a proto built soon.

Thanks
James

Friction? Liner-lock? Frame-lock? Lock-back?

Pocket clip or no?

Etowah Edge

02-20-2010, 08:50 AM

Friction? Liner-lock? Frame-lock? Lock-back?

Pocket clip or no?

It's a surprise!

Actually it is none of the above. :-X

I will update as soon as I get a break and get some work done on it. I have made some jigs for the knife, made some parts to check the geometry but have not had time to put a proto together yet.

James

DemskeetSkeet

02-20-2010, 09:18 PM

It's a surprise!

Actually it is none of the above. :-X

I will update as soon as I get a break and get some work done on it. I have made some jigs for the knife, made some parts to check the geometry but have not had time to put a proto together yet.

James

Oh man, I'm sure this isn't it but I have to guess: Bali-song?

If it is, I am all in.

It's not that easy to make one so I am going to also say that I am wrong. I can only wish though.

Crco

02-20-2010, 11:24 PM

My family and I are the proud owners of 3 Etowah tools ... a Carry-Size Pryz Bar, an EBot, and a Pry Knife. And I tell ya something, these are all excellent, well-built tools. The reason I'm gushing about them is that bang-for-the-buckwise - they are truely inexpensive for the quality utility that they provide. That said, I can't wait to check out the prototype knife mentioned below. :)

Etowah Edge

02-22-2010, 05:14 PM

Thanks for the comments. I hope to have something soon.

James

Liam91

02-22-2010, 05:44 PM

Tagged so i don't miss the next batch of ebots :-)

SF1

03-20-2010, 03:16 AM

Etowah Edge

04-22-2010, 04:24 PM

I wanted to let everyone know I will be at the Atlanta Blade Show, table 22E, in June. Come see us !

James

DemskeetSkeet

05-17-2010, 07:32 PM

I wanted to let everyone know I will be at the Atlanta Blade Show, table 22E, in June. Come see us !

James

I know someone that is going so I would like to know what you will be offering at the show please. You can pm or email me(in sig).

That way I can tell them if I would like them to pick something up for me.

Thanks!

Etowah Edge

05-21-2010, 03:29 PM

I'll go ahead and post some info here. I will have some new products that will be released at the show. Some are small key chain size stuff and some are full size knives. There will be a new version of the Pry Knife with some new grinds (some one of a kind), an improved Spy Knife with traction thumb grooves for better grip, a shorter version of the Cheaptrick, a lot of one-off key chain knives, the new Sub-Cruiser line, and a lot of one-off hunting and survival style knives. All together, there will be about 90 items for sale. I have been working to much lately.lol

Thanks
James

vegassprky

05-21-2010, 10:36 PM

Oh sure a new Spy knife, when I just got one from Moore's! Just joking love my OD Spy knife!!! Glad to hear of your new stuff!!! Don't stop!!!

Etowah Edge

05-22-2010, 08:40 PM

Thanks. I should be getting some pics up soon. I worked all day today on sheaths. Lanyards tomorrow.

Hawk9807

05-23-2010, 04:16 PM

Very nice work. Will probably see you at the Blade show.

Etowah Edge

06-12-2010, 08:49 AM

I have a small EDC knife available. It has a S30V blade that is 2.5" long making it legal to carry in most places. The OAL is 5.75". The handle is textured black linen micarta with micarta pins. It is very slim, light and easy to carry. It has a belt sheath and a neck carry sheath, both black kydex. The price is $155.00 shipped.

Thanks for looking
James
http://i470.photobucket.com/albums/rr69/EtowahEdge/DSC02534-600.jpg
http://i470.photobucket.com/albums/rr69/EtowahEdge/DSC02535-600.jpg

MattW

06-12-2010, 08:58 AM

That is gorgeous! :drool:

Etowah Edge

06-19-2010, 06:05 PM

[quote=etowah edge;913951]i have a small edc knife available. It has a s30v blade that is 2.5" long making it legal to carry in most places. The oal is 5.75". The handle is textured black linen micarta with micarta pins. It is very slim, light and easy to carry. It has a belt sheath and a neck carry sheath, both black kydex. The price is $155.00 shipped.

Thanks for looking
james

The knife above is sold.