Screw Links

[samson722]

Anyone know where to get decent mini screw links (preferably Ti, but steel is ok)?* I checked the ones offered at County Comm, we'll see.* I'm looking for something relatively small in circumference.* The story is that I bought a key ring that used a steel screw link (which I broke), and now the manufacturer is telling me they stopped using the screw links because of this little problem.* Well, I think they're a great idea, and a way better alternative to conventional keyrings.* The reason I'm trying to find a screw link (preferably pear-shaped) is so that it can interface with the key holder I bought, which is from Zaktool.

<a href="http://www.zaktool.com/keyring.html">Zaktool Tactical Keyring Holder</a>

The big problem here is the dimensions of the screw link pictured in the above link. It's large area wise, but it isn't real thick, so keys can move freely, even past the gate portion, which is a convenience factor, it also makes it less cumbersome to flip through the keys.

I really don't want to have to try and find a conventional round ring that is going to hold all those keys.* The other big driving force behind the screw link is that it's large enough so that I can put the keys in my back pocket, but it's fairly slim profiled, so it's not as big as most hardware screw links designed for harnesses or gear retention.* Let me know what you come up with.* As always, I'm in debt to all of you fine EDCFer's for your wonderful research skills and good advice.* Thanks.

[Barefootone]

Hey Samson722,
You might try* *http://www.berkeleypoint.com/index.html* they have all kinds of Ti and Stainless goodies O0 that might fit your needs.
* * * * * * * Good luck,
* * * * * * * * Barefootone

[samson722]

Been there already, they're all too large in diameter, but thanks anyway. Berkeley Point has some great stuff though. Welcome to EDCF, by the way!

cheers!

samson

[Deaths Head]

Here ya go! Just what you are looking for.
http://countycomm.com/tiscrewlink.htm

[samson722]

Here ya go!* Just what you are looking for.
http://countycomm.com/tiscrewlink.htm


Thanks DH, those look great! I'm going to call County Comm to see what the measurements are, as the pics aren't really telling as to whether or not these are the right size. All the same, thanks for the great tip!

[0dBm]

The early version from countycomm had some problems with sturdiness. I hope this improved version corrected that flaw. If anyone samples these, please report.

I am looking to assemble the lightest keychain possible using Ti.

Thanks in advance.

[Gadget Guy]

They are just under 1-1/2" long by just under 3/4" at the largest point. I love them!!

GG

[samson722]

OK, great! That's a start, but I'm interested in knowing whether or not it will pass through a standard house key, auto key, etc...including the nut portion. Any empirical evidence for me? Thanks.

[0dBm]

It depends on how large the hole is and how thick the key is. I have found that the door keys made by Schlage and Baldwin do fit.

[Stormdrane]

I've bought from this ebay seller (http://cgi.ebay.com/LARGE-MALIBU-KEY-RING_W0QQitemZ6601364978QQcategoryZ3628QQcmdZViewI tem) before, maybe he'll have what you need, and I've used these (http://www.cdwplus.com/quicklinkspage.html) before as well.

[stillphoto]

I use one of the county comm ti screw link things as my edc keychain....I've had them a while and I already stopped trusting the first one, the second one is now starting to have the same problems...The screw comes undone...when its attached to the most threads, the back end seems to come out after a bit of use. I love the fact that they're Ti...but I really wish they wouldn't sorta stretch out that much durning usage...all I have on them is 2 regular house keys, a car key, a remote for my alarm, my arc aaa, and a really small pill fob. sounds like alot but it weighs next to nothing. By stretch I dont mean that I visibly see them bend, but over time you can tell the tolerances just aren't the same...so they've opened on me a few times.

[samson722]

oh great..... >:( i had the same problem with the screw link i have now...i was hoping that a Ti link might alleviate that problem, but I guess not. Irregardless, I still need a new link, so we'll see.

[stillphoto]

I mean if you dont regularly open the link once its loaded up, i guess you could use some teflon tape on the threads to give it better "bite." Yeah if nothing else you have a new one to replace the other thats alot lighter.

[balrog]

Is this what you are looking for?

http://www.rei.com/online/store/ProductDisplay?storeId=8000&catalogId=40000008000&productId=47925220&parent_category_rn=10642126&vcat=REI_SEARCH

[stillphoto]

Funny you should mention that Balrog...I went by REI today and picked up http://www.rei.com/product/47840502.htm?vcat=REI_SEARCH

More logical design than the titanium ones we talked about earlier...Big downside is the girth of the metal itself, but the benefit is its threaded on both ends of the loop, not just the top end. This allows it to stay in place alot easier...Still not a complete solution, I stood there looking at caribiners and keychains for quite a while trying to find a device that would be perfect. :D

[Lunal_Tic]

I've had the same problems with the CountyComm links. The wire is too short so when you screw it tight enough to keep it together there is a gap at the other end of the screw.

I've tried to mod them by using needle nose pliers to destroy a couple of the top threads. That way it won't screw so high on to the upper part. It also seems to make it seize a bit and holds together better.

I've had better luck with some old stainless ones. I'm guessing that the Ti they use is Grade 1 or 2 and it's just too soft in addition to having a too short wire length.

-LT

[Bagheera]

>:( Same thing here, my 4 Ti screwlinks retired to being "wall hangers".

Cheers,

Bagheera

[stillphoto]

This is the last thing County Comm needs to hear lol, then again, its not like there was a moneyback guarantee

[samson722]

Maybe it's just me...but I smell enough dissent here to possibly organize a group buy of some kind. Anyone else? I'd be willing to go in on quite a few Ti screw links if we could find a maker that would be willing to get the tolerances tight enough to make an acceptable product. What do you think? Maybe we could suggest to County Comm that they make an improvement, as I noticed on their website, they had their present offeriing custom made to suit the needs of a client. Just my .02!

Samson

[Gadget Guy]

Count me in! If the quality was better, then I will be down for about 20 of them.

GG

[samson722]

Lucky Line has them cheap in large quantities, but they're not even steel...only anodized aluminum. Any suggestions? I'm at a loss...I googled everything I could think of, and nothing.

[Deaths Head]

Maybe it's just me...but I smell enough dissent here to possibly organize a group buy of some kind.* Anyone else?* I'd be willing to go in on quite a few Ti screw links if we could find a maker that would be willing to get the tolerances tight enough to make an acceptable product.* What do you think?* Maybe we could suggest to County Comm that they make an improvement, as I noticed on their website, they had their present offeriing custom made to suit the needs of a client.* Just my .02!

Samson

I am in. If they improve on them, I could stock up some. I could purchase at least 5.

[Ors]

>:(
I just ordered 4 of the County Comm Ti links. Even if they fail, I suppose I could be out a lot more money.

I would support an effort to solicit custom links.

[0dBm]

>:(
I just ordered 4 of the County Comm Ti links. Even if they fail, I suppose I could be out a lot more money.

I would support an effort to solicit custom links.



The Ti links on the countycomm site are the improved version. Let us know how well they hold up.

[Lunal_Tic]

The Ti links on the countycomm site are the improved version.


Improved version???

-LT

[0dBm]

Per the webpage:

"Titanium (Ti) Screw Link
Another County Comm Exclusive

NOW IMPROVED: With Deeper Threads and Thicker Metal."

[Lunal_Tic]

Cool, thanks. I bought a number before that were nearly useless so I'll wait to hear about these.

-LT

[Deaths Head]

So does anyone know if they have any experience with the improved ones?
Hopefully good experiences.

[samson722]

Now I'm intensely confused...I think I'm going to have a buy one and try it out, just to see for myself whether or not this improvement is enough of an improvement to allow for the kind of beating I put these things through. In any event, I'm still not convinced that the problem is solved until someone who's positive they have the improved version can tell me that that the top does not separate from the gate under normal use. Even then, I may have to drop the $3.00 + SH and get one for myself. ??? :help:

samson

[Prof. Ed]

My Ti link from County Comm separated too. I am curious if the new version is better, also.

[Deaths Head]

Now I'm intensely confused...I think I'm going to have a buy one and try it out, just to see for myself whether or not this improvement is enough of an improvement to allow for the kind of beating I put these things through.* In any event, I'm still not convinced that the problem is solved until someone who's positive they have the improved version can tell me that that the top does not separate from the gate under normal use.* Even then, I may have to drop the $3.00 + SH and get one for myself.* *??? :help:

samson

That would be a good idea. Not only try it out though. Actually put through somewhat of a torture test of sorts.

[samson722]

Will do. I'll try to get the order out asap. I'll see what kind of heinous torture tests I can come up with. >:D If you have any ideas as to what might really put these through the paces, pass 'em along. :)

[Deaths Head]

I would say it would have to be realistic. Maybe opening and closing them 500 times or something. Or close them tightly a few times to see if screw fails.
One thing to keep in mind is that titanium is actually a soft metal, especially if they don't use 6AL4V. But it is a springy metal with a good memory once it has formed, so I am not sure what to expect from these screw links.
I would recommend purchasing two. Keeping one as a control for comparison to the other which you will do tests on.
Also, I would suggest calling CountyComm up and finding out what exactly are the improvements they made.
Just my 2 cents.
I look forward to your review.

[Ors]

Maybe opening and closing them 500 times or something.

Can you say "repetative movement injury"? :lolhammer:

[0dBm]

I think I'm going to have a buy one and try it out, just to see for myself

samson



Did you end up buying one? I'm curious.

[samson722]

Well, here's the story with that...I wanted to wait until I had the cash to buy a couple other things from County Comm, so I could save on shipping. Silly I know, but for instance, when I got a zulu strap from them, the shipping was outrageous. I paid $16 for the strap, and $9 in shipping. I'm not some money grubbing jerk or anything, just a very poor college student. ;D I promise I'm going to get a hold of a couple as soon as I can.

[0dBm]

Thanks for the reply.

$9 is lot for shipping!

Looking forward to your thoughts on the Link.

[heathah]

I just placed an order today for some paracord and other supplies along with a few of the "new improved" screw links. They should ship today as I chose UPS 2Day so I should have them by Friday. If I get them by Friday, I'll let you guys know how they compare to the older version. Perhaps even some comparison pics. :)

[samson722]

thanks, heathah! I really appreciate it...now I'm off the hook till I get a couple. I still feel like torturing one or two to see how well they're going to serve me. >:D

[Deaths Head]

I am curious how they hold up.

[Redhed]

Yeah, I am curious too. I bought four - maybe a couple years ago (for consideration as EDC keychains - use Lucky Line Fix-O-Locs now though) and two were defective. On one the screw barrel part doesn't stop - you can keep screwing until it comes off in either direction. On the other defective one it will screw down, but the link is too short when it's fully tight and there is a gap!

Unless they are "really, really new and improved" I wouldn't use them for anything too serious. Thanks for the teflon idea, I may try that or had considered locktite for a permanent attachment somewhere...

[stillphoto]

really all they need to do is make the little screw part a few mm longer, and maybe tighten the tolerances a bit between the pieces...I bought a larger steel and brass one from a local outdoors shop...It's considerably bigger, but still works as a keychain just fine...its actually extremely well made and tightens down and stops as it should. Best of all it was only a few bucks..I'll try to post a pic later

[Desert-K9]

I'm kinda coming into this late, but I have had the same problems with 4 Ti screwlinks from County Comm. I had to retire them from serious use. >:( If they did fix the problem I'd love to buy a bunch.

[Deaths Head]

I'm kinda coming into this late, but I have had the same problems with 4 Ti screwlinks from County Comm.* I had to retire them from serious use.* >:( If they did fix the problem I'd love to buy a bunch.

I can never hear enough complaints regarding this product. It really provides the need review on a product that has so much potential.
I am sure many of the members thought that it only happened to them.

[0dBm]

I just placed an order today for some paracord and other supplies along with a few of the "new improved" screw links.* They should ship today as I chose UPS 2Day so I should have them by Friday.* If I get them by Friday, I'll let you guys know how they compare to the older version.* Perhaps even some comparison pics.* :)


H3, (heathah) ;D

Looking forward to your thoughts.

[Ors]

Well, here's the story with that...I wanted to wait until I had the cash to buy a couple other things from County Comm, so I could save on shipping. Silly I know, but for instance, when I got a zulu strap from them, the shipping was outrageous. I paid $16 for the strap, and $9 in shipping. I'm not some money grubbing jerk or anything, just a very poor college student. ;D I promise I'm going to get a hold of a couple as soon as I can.

I am a money grubbing jerk :laugh:
If I can get a product from more than one place, I will go through the online order process until it gives me the total and if I can get it a couple of bucks cheaper, I'll go with that place. Then there's the mentality "How much do I have to spend to get free shipping?" :P
For example, I wanted to get some scrap pieces of hemp fabric from a place...one pound of scraps was $5...great deal...or so I thought. UPS shipping from California to the Midwest was $13!! :o >:(

No sale.

And I just hate when I'm short on funds, and want to get one item for $5 or $10, and then the shipping ends up being as much as or more than the cost of the item >:(

I don't mind spending my money on a good bit of kit, but I hate parting with the coinage for the shipping and handling charges :(

[Deaths Head]

Does anybody have any updates on this product?

[lcranston]

I have had two of the new screw links for the past couple months or so. I am using one as my key ring. The metal is thicker and the threads are longer. On the old ones, I could tug on the ring and you could easily see it sparate on the non threaded end. I tugged on the newer ones and don't see a gap, but it still feels like there is no flange. They are better than the older ones, but too small and not designed for weight bearing.

[samson722]

I have had two of the new screw links for the past couple months or so.* I am using one as my key ring.* The metal is thicker and the threads are longer.* On the old ones, I could tug on the ring and you could easily see it sparate on the non threaded end.* I tugged on the newer ones and don't see a gap, but it still feels like there is no flange.* They are better than the older ones, but too small and not designed for weight bearing.


If you really crank it down tight, so that the screw is tightened all the way down, have you had issues with separation? or is that issue resolved... with the model I have now, it won't separate, but I can't screw it too tight, because the unthreaded end always pops out. I've lost keys that way, it's very annoying! If the problem is fixed, I'll definitely buy some. Thanks for the info.

[Deaths Head]

I'm going to wait for more comparisons.

[pipedreams]

I'm waiting for more info, myself.

todd

[0dBm]

I just placed an order today for some paracord and other supplies along with a few of the "new improved" screw links. They should ship today as I chose UPS 2Day so I should have them by Friday. If I get them by Friday, I'll let you guys know how they compare to the older version. Perhaps even some comparison pics. :)


H3,

Have you received yours yet?

[Deaths Head]

I always wanted to buy a couple, but I didn't want to pay for the steep shipping costs. Now, the more I read about it, the more I want a few. I really hope that all the kinks are fixed and then maybe we could set-up a group buy.

[samson722]

I really do intend to pick some up and see what they're really made of, so to speak. Its been a frustrating couple of weeks. I'm changing jobs, and the new company that I got hired on with has been playing games...not returning my calls, dodging my questions about when I can start...I promise as soon as I get a paycheck or two in, and take care of a couple bills, these links are the first thing on my list. Good things come to those who wait...remember that. Keep the faith, and I hope anyone that has the new links has great success!

Cheers!

[heathah]

Sorry it's taking me so long to do a review but I just got a new position and we are moving into a different apartment so things have been very crazy.* I'll do a formal review as soon as everything gets situated and I find my camera.* :(* Let me just say that it does feel better than the previous CountyComm scew links.* I'll try to do some comparison photos as well as a complete personal review and post it within the next couple of days.* Stay tuned... :)

[0dBm]

Let me just say that it does feel better than the previous CountyComm screw links.*

Cool.* This shows some promise.

I've got more than a few applications waiting for this product.

I'm in for at least 5 if the group buy materializes.

There is an alternative at Berkeley Point (http://www.berkeleypoint.com/products/titanium/ti3ql.html), but at $16, they are over 5 times the cost of Countycomm's offering.

[stillphoto]

Here's what I've been using as of late to replace the county comm version:

http://i55.photobucket.com/albums/g136/Stillphotog/EDC%20and%20CPF/th_82c21ea5.jpg (http://i55.photobucket.com/albums/g136/Stillphotog/EDC%20and%20CPF/82c21ea5.jpg)
http://i55.photobucket.com/albums/g136/Stillphotog/EDC%20and%20CPF/th_633f6fad.jpg (http://i55.photobucket.com/albums/g136/Stillphotog/EDC%20and%20CPF/633f6fad.jpg)

Yes, bigger, this actually allows you to easily get a finger into the link to hold your keys by it..its heavier yes (a trivial amount) but this guy has yet to come un threaded and due to its design (the screwable part being almost 50% longer) it hasn't disconnected from the bottom. In fact the design pretty much makes that an impossibilty.

Bought it for under $3 from the local Adventure 16.

Sure I'd love for it to weigh nothing, and to be ti for that cool factor, but in this case reliability and utility have won.

[samson722]

Do you know if Adventure 16 sells these online? I looked at their website and couldn't find them anywhere. Unfortunately, I live on the East Coast, so I'm SOL if there's no way for me to get them online. Thoughts?

[0dBm]

Sam,

I think I have one not in use. PM me your addy and I'll send it to you.

[lcranston]

I have not had a problem with the newer ones. I have been using one as a key ring and one is on an Infinity Ultra-G. The flaw in the design seems to be not having a rim/flange to keep the non threaded end from popping out if pulled hard. The thicker material on the newer one appears to make this less likely. I like the ones I have. Even though they are thicker, I am able to keep a few keys on it without spilt rings. I tossed out the old ones I had, so I can't give you a visual comparison. When I got the newer ones, I pulled on the non threaded end to see if it would spread out like the old ones. There is a little springyness, but the loose end does not come out and it springs back to the original position. If anyone wants to see one, I can scan one with a rule by it on Monday.

[Deaths Head]

Here's what I've been using as of late to replace the county comm version:

http://i55.photobucket.com/albums/g136/Stillphotog/EDC%20and%20CPF/th_82c21ea5.jpg (http://i55.photobucket.com/albums/g136/Stillphotog/EDC%20and%20CPF/82c21ea5.jpg)
http://i55.photobucket.com/albums/g136/Stillphotog/EDC%20and%20CPF/th_633f6fad.jpg (http://i55.photobucket.com/albums/g136/Stillphotog/EDC%20and%20CPF/633f6fad.jpg)

Yes, bigger, this actually allows you to easily get a finger into the link to hold your keys by it..its heavier yes (a trivial amount) but this guy has yet to come un threaded and due to its design (the screwable part being almost 50% longer) it hasn't disconnected from the bottom. In fact the design pretty much makes that an impossibilty.

Bought it for under $3 from the local Adventure 16.

Sure I'd love for it to weigh nothing, and to be ti for that cool factor, but in this case reliability and utility have won.

Looks like we found another Ti screwlink Woohoo! THanks Stillphoto. It's priced great as well!

[Gadget Guy]

I have bad news on the Comm. version. I bought six of them and the screw down mechanism has stripped on all of them after only a few uses. I thought $3 for them was too cheap! I just want to save other people from wasting their $$.

GG

[Deaths Head]

I have bad news on the Comm. version. I bought six of them and the screw down mechanism has stripped on all of them after only a few uses. I thought $3 for them was too cheap! I just want to save other people from wasting their $$.

GG

Were the ones you bought the newer version GG?

[Gadget Guy]

I've had them about two months, so i'm not sure?? Did they fix the problem? Are they standing by their product and offering an exchange?

Thanks,

GG

[Deaths Head]

Somebody said that they used thicker Ti and improved on the threads. That' why I'm waiting for a comparison. Look like you will be hitting 1000 shortly Inspector!

[Gadget Guy]

Probably in a day or two. Looks like you will take the post lead soon too. I really just want to get to 1000. My total for all other forurms is, are you ready? two posts!! ;D

GG

[Deaths Head]

Probably in a day or two. Looks like you will take the post lead soon too. I really just want to get to 1000. My total for all other forurms is, are you ready? two posts!!* ;D

GG

Take the lead? I don't know. Post Master is still pretty high up there. I'll always be nipping at his heels though.

[Gadget Guy]

Come on Fonzy, you have made up so much ground on the Postmaster that he will be left in the dust by next week. I better get :topic:, as I don't want to get in trouble. ;D

GG

[lcranston]

I just noticed the newer County Comm screw links are the same as the screw link that came with the Brunton Mi-Ty titanium camp set (knife,fork,spoon). *

[Deaths Head]

Come on Fonzy, you have made up so much ground on the Postmaster that he will be left in the dust by next week. I better get* :topic:, as I don't want to get in trouble.* ;D

GG

One more unrelated post. *I just checked the stats and I make an average of 2 more posts than the Post Master each day. *At that rate, it will take me 100 days to catch up to him. *He's not worried. *Anyways, I like being second! :laugh:
:topic:

[Deaths Head]

I just noticed the newer County Comm screw links are the same as the screw link that came with the Brunton Mi-Ty titanium camp set (knife,fork,spoon). *

Maybe them get them from the same place. I don't think Brunton would just defective products, even if it is just a screwlink. Look like good news to me.

[Gadget Guy]

I just noticed the newer County Comm screw links are the same as the screw link that came with the Brunton Mi-Ty titanium camp set (knife,fork,spoon). *


Are you saying that there is no improvement on the new ones?

GG

[lcranston]

There is improvement over the old ones I purchased from County Comm.* The new ones appear to be the same as that on the Brunton set I bought.

[lcranston]

Here is a picture of the link in use.

[samson722]

oh man, now that i look at it, that link is a lot smaller than i expected it to be in practice. I'm sure I can find a good use for it though. The one I have now is 2.5"L x 2" (at it's widest part)...Unfortunately, it fell victim to the same issues as the original County Comm links early on in it's use. I have seen links of comparable size, but most of them are low quality brass. Ti is where it's at. I wish I could find something of similar size that had excellent construction quality!

Samson

[Gadget Guy]

What I really want is a small titanium carabiner. I would even go for a quality mini aluminum one, but most of the ones that I see are junk! Anyone know where to find good quality small carabiners?

Thanks,

GG

[samson722]

I looked around, and I haven't found any SMALL Ti carabiners, but Berkeley Point has a rather diminutive Ti Gate Snap...appears to be good construction quality, and it comes in 2 sizes, measuring 1-15/16" or 2-7/8". Don't know if this would meet your needs, GG, but I thought I'd give it a shot. Good Hunting!

Samson

[Deaths Head]

I have a few of the Ti snap gates. I think they are the perfect size for key rings.

[dinoadventures]

any idea as to online availability of the Adventure 16 screw links? I have a few of the county comm ti's that came a week ago and i've been pleased with them so far but i'd like something larger.

[0dBm]

I placed an order for 4 of the Countycomm Ti Links. They should arrive before this Friday. If they do, at least 2 will accompany me on a trip to the right coast. A long trip is one of the best ways to eval an EDC item. I will post the results.

BTW, samson722, I am still looking for that link.

[samson722]

any idea as to online availability of the Adventure 16 screw links? I have a few of the county comm ti's that came a week ago and i've been pleased with them so far but i'd like something larger.


O0 I had the same question. *I'm definitely interested in something akin to the size of the Adventure 16 screw links. *It would definitely help out, seeing as I have to carry quite a few keys.

[Deaths Head]

Me too!

[lcranston]

any idea as to online availability of the Adventure 16 screw links? I have a few of the county comm ti's that came a week ago and i've been pleased with them so far but i'd like something larger.


Looks like Berkeley Point has them, but it looks like they are on vaca unitl Jul 13.

http://www.berkeleypoint.com/products/hardware/bpl.html

[samson722]

BTW, samson722, I am still looking for that link.


no worries, my friend. *I am a man of infinite patience. *stay in touch.

Cheers!

[Deaths Head]

Looks like Berkeley Point has them, but it looks like they are on vaca unitl Jul 13.

http://www.berkeleypoint.com/products/hardware/bpl.html

If you guys buy from Berkeley Point, please make sure you click on our banner that shows up at the top of the page. It helps raise funds for EDCF. Also use this info for our discount:
Username: edc
Password: everydaycarry

[samson722]

I have no doubts about the quality of any of the stuff I have from BP, but....13.00 for shipping a $3 screw link?!?!?!?!?!? I DON'T think so... Normally I tend to say that shipping is a fact of life and just pay it, but man....that is bad. >:D I'm not crazy am I?

[dinoadventures]

I think it cost me like $9 to ship $10 worth of stuff last time I ordered. They actually didn't include one of the items I ordered and I shot them an email about it.
The priority-mailed me my missing item and tossed in this for free:
http://www.berkeleypoint.com/products/hardware/harnessclip.html

[Deaths Head]

That was cool of them. I just wonder why they charge so much for shipping?

[samson722]

That was cool of them.* I just wonder why they charge so much for shipping?


I figured it out last night...they use flat rate shipping like a lot of other companies, so everything up to a certain weight is the same price. This wouldn't be a problem in most cases, except a lot of the products they sell are very light. 50 screw links is the same as 1 in terms of the price. 100 screw links is only a little more. This isn't as absurd as I thought, but I won't be paying $13 for shipping unless I AM getting 100 screw links.

[gp_frk]

I didnt see it mentioned yet after that link was posted but how many of you noticed that the BP pear link is stainless not Ti?

"Stainless steel key ring with threaded brass gate. 3 mm diameter barstock will fit into most keys. Safe working load: 10 lbs."

[samson722]

yeah, i knew the whole time. their other screw link that is Ti is a little too fat for my taste, not to mention expensive. the gate portion of the link is massive, and that doesn't work so hot for keyring use in my opinion. just my .02

samson

[lcranston]

I didnt see it mentioned yet after that link was posted but how many of you noticed that the BP pear link is stainless not Ti?

"Stainless steel key ring with threaded brass gate. 3 mm diameter barstock will fit into most keys. Safe working load: 10 lbs."



The Adventure 16 link is also stainless.

[Deaths Head]

I am sure we can call Berkeley Point to get a discount on shipping if it is just one or two items.

[dinoadventures]

I am sure we can call Berkeley Point to get a discount on shipping if it is just one or two items.


i thought about it. maybe we can arrange a group buy? it won't be that much and i dont think it would be hard to get rid of berkeley point stuff in quantity.

[Deaths Head]

That's a good idea. I'm sure things like Ti snap gates would be strong sellers.

[0dBm]

Looks like a fellow member has been using the new and improved countycomm Ti link and is pretty satified with it.
thread (http://edcforums.com/index.php?topic=1916.from1151554854;topicseen#msg2 3020)

[Deaths Head]

This is the question from 0dBm:
"Is that a Countycomm Titanium quick link holding everything together? If so, how is that thing holding up? I have several arriving tommorow and I will be using them immediately for various uses."

Here is dinoadventures response:
"pretty well, actually. the revision seems to be effective. I'm very satisfied with mine."

I would like to get into a group buy with this.

[samson722]

Sweet! I'm in, too. I think I'm satisfied having heard that there don't seem to be apparent problems with these links. Count me in for like 5, I guess. If it's not too much trouble, could someone PM me when all the details are worked out? Thanks so much.

Samson

[heathah]

Well, guys, I've finally been able to post a small review.

Sorry it took me so long.

http://edcforums.com/index.php?topic=1936.msg23237#msg23237

[Deaths Head]

Well, guys, I've finally been able to post a small review.

Sorry it took me so long.

http://edcforums.com/index.php?topic=1936.msg23237#msg23237

Great review. I'll take your info into consideration.

[0dBm]

Well, they arrived a few minutes ago. Here's a few shots.

These links are tiny and, for me, perfect for what I am going to use them for.* They are more robust than the earlier version.* I estimate the load to be no greater than 10 lbs. since there is a bit of "give" if pulled apart from opposite ends.* * *
http://i62.photobucket.com/albums/h85/0dbm/c66b2dda.jpg

They have that neat dull grey color that several of us here find so cool.
http://i62.photobucket.com/albums/h85/0dbm/4de9c051.jpg

The opening is about 3mm and will accomodate all but the fatest, thickest keys.
http://i62.photobucket.com/albums/h85/0dbm/a6541ad4.jpg

These have instantly found their place among my other Ti stuff. ;D
http://i62.photobucket.com/albums/h85/0dbm/2c746bb3.jpg

I will not be attaching too many items to them.* Not because that I feel they cannot take the load, but because I cannot take the load.* I don't overload my stainless steel Berkeley point links this way as well.* Too many items on one link makes for bulky pocket ED Carry.

Overall I am pleased with their quality.* If Countycomm decide to improve them as others here have suggested, I will likely buy some of those, too, with the intention of getting the best EDC stuff for my money and not because that I think that what will be the improved versions, whatever the improvements will be, will perform better than these.

I look forward to getting the Fixed Bail Ti Snap Shackle to complement these.

I will post more after field trials. ;D :P

[heathah]

Nice review. I need a new camera. :(

[Lunal_Tic]

So these won't pull apart like the old ones? After using them for a bit let us know how the screw gate fairs, will it stay closed?

TIA,
-LT

[Deaths Head]

They look great. If I get one more good review, I'm picking a few up.

[0dBm]

So these won't pull apart like the old ones?* After using them for a bit let us know how the screw gate fairs, will it stay closed?

TIA,
-LT


I'm not the Governator by any means, but not 75 years old yet. I gave it a good tug and the joint did not part. The beefier build has a lot to do with that.

I'll report back in a few months.

[Deaths Head]

OK that's it, I'm buying five.

[samson722]

Atta boy, Fonz! ;D Cave in like the rest of us! :lolhammer: As soon as I actually have more than $0.43 in my pocket, I will be purchasing some as well.

[dinoadventures]

I'm not the Governator by any means, but not 75 years old yet.* I gave it a good tug and the joint did not part.* The beefier build has a lot to do with that.

I'll report back in a few months.


I should give this the old college try also...
brb...

I was able to separate them, but it took a whole hell of a lot more than 10lb. more like at least 50. you have to deform the Ti wire quite a bit. I don't think my keys will ever have a working load that great. I'm happy for my three bucks.

[Deaths Head]

I think even 10 lbs is sufficient. I don't even expect that from the well made steel ones. If it took well more than 10, than I'm going to buy a few.

[dinoadventures]

it took a whole hell of a lot more than 10lb.

[Lunal_Tic]

This is good news since I've finally getting rid of my old style ones on various "out of site out of mind" projects.

-LT

[Deaths Head]

I just bought 5 pieces. I'll see how they hold up. Just by what everyone has stated regarding the improved version, I am confident they will hold up.

[samson722]

let us know what you think

[samson722]

anyone know of any oval shaped links? I have uses for all my pear links at this point, the problem being that the narrow portion of the link is too narrow to fit from the key hanger on my belt. I suspect that this is going to be a problem with any pear link I buy, unless it's large enough that the narrow end is much larger than on the county comm links, or even the berkeley point links. this is why I came up with the thought of looking for oval shaped links...that way, logically, the two ends of the link are the same width, and any link of an appreciable size should be wide enough to hang comfortably from said belt hanger. Thoughts? Anyone?

[Deaths Head]

This (http://www.berkeleypoint.com/products/titanium/gatesnap.html) isn't oval, but it is titanium, and it is what I use with my keys to hang on my belt loop.

If you want oval, This (http://www.berkeleypoint.com/products/titanium/ti3ql.html) isn't a snap kind but it is also titanium and this too can be found at Berkeley Point.

[Gadget Guy]

OK that's it, I'm buying five.


Buy 10 and i'll split the shipping with you. :highfive:

GG

[Deaths Head]

Buy 10 and i'll split the shipping with you.* :highfive:

GG

I ordered them a couple days ago already. I'll try to get a hold of them to see if they shipped it out already. I didn't get a shipping notice yet, so I'll add 5 more if I still can.

[Deaths Head]

I just received me five.* They look great and feel solidly built.* Only time will tell to see how they hold up.
http://i69.photobucket.com/albums/i57/deathshead77/P7060122.jpg
http://i69.photobucket.com/albums/i57/deathshead77/P7060123.jpg

[dinoadventures]

So...this begs the bottom-line question...worth your three bucks?

[Deaths Head]

So...this begs the bottom-line question...worth your three bucks?

At this moment, definitely worth the 3 bucks. I would have paid $10 each for them. But we'll see in a year or so. If they don't last that long, then they aren't worth anything to me.

[Deaths Head]

Buy 10 and i'll split the shipping with you.* :highfive:

GG

Sorry GG, I called them last Monday to see if they shipped my order they said that they had shipped the links a few days prior. I received the links that day.

[0dBm]

After 10 days of use, 7 of which were travel to and from the left and right coasts, the two that I carried during this time have held up very well.

I made it a point of disconnecting and connecting one of them at least 3 times a day during those 7 days of travel.* So far, so good.

I have certainly gotten my $6 dollars worth out of these two.*

Actually, my wife was using the second one during this time.* She is quite abusive to her daily carry items.* She did not break it.* O0* *